4 set the time and date, 5 change system management – AirLive WHA-5500CPE User Manual
Page 34
3. Configuring the WHA-5500CPE
27
AirLive WHA-5500CPE User’s Manual
3.5.4 Set the Time and Date
It is important that you set the date and time for your WHA-5500CPE so that the system
log will record the correct date and time information. Please go to “System
Configuration” ->Time Settings. We recommend you choose “Enable NTP” so the time
will be keep even after reboot. If your WHA-5500CPE is not connected to Internet,
please enter the time manually. Please remember to select your local time zone and
click “Apply” to finish.
3.5.5 Change System Management
It is recommended that you change the system management settings first. Please go to
“System Configuration”-> “System Management”. The default web management time
out is 10 minutes, you can set to longer period if needed. For WISP administrators, you
can consider turning off HTTP and Telnet for security purpose.
5
4
3
2
1
6