AirLive WL-1200CAM - Manual (Page 21)

AirLive WL-1200CAM User’s Manual
18
2.2.1 Motion Detection
When you ’re using ‘MPEG4’ encoding format, you can use motion detection function. When a motion is
detected, the IP camera will take a picture automatically.
To setup motion detection, please select ‘MPEG4’ as encoding format, and right-click on the image. A
pop-up menu will appear:
Please click ‘Motion Detection’ in pop-up menu, and a new setup menu will appear:
TIP: You can setup motion detection area here; however, you have to enable motion
detection function of this IP camera before it really works. Please refer to chapter 2.6 to
see detailed instructions for how to enable this function.