AirLive WL-5420CAM - Manual (Page 40)

WL-5420CAM User’s Manual 39
- Connection Mode: Use this option to determine the
type of wireless communication for the camera. There
are two choices: Infrastructure mode and Ad-Hoc
mode.
- SSID: SSID (Service Set Identity) is the name assigned
to the wireless network. It will auto-detect and display
the SSID of wireless network connected in this box.
This default setting will let the camera connect to ANY
access point under the infrastructure network mode.
- Channel: This pull-down menu provides the wireless
channel for communication. Select the appropriate
channel from the list provided depending on the
regulatory region where the unit is sold.
- Security Mode: Wireless network communications can
be intercepted easily. This option will help you protect
your wireless network.
- Authentication: Open communicates the key across the
network. Shared allows communication only with other
devices with identical WEP settings.
- Encryption Mode: This option allows you to configure
the setting of data encryption. The WEP key must be set
before the data encryption is enforced.
- Key Format: To enable WEP Encryption, you should
decide the encryption format first by selecting the
ASCII or HEX option, and then input the WEP key (in
the following Key 1~4 box).
- Pre-Shared Key: This is used to identify each other in
the network. If encryption is enabled on the router or
access point in the network. You must enter the same
encryption key in the Pre-Shared Key box to access the
device in camera.