Chapter iv: configuration, 1 login, 2 status – AirLive WL-5450AP User Manual
Page 16
AirLive WL-5450AP User’s Manual
14
Chapter IV: Configuration
4.1 Login
1.
Start your computer. Connect an Ethernet cable between your computer and the Wireless Access Point.
2. Make sure your wired station is set to the same subnet as the Wireless Access Point, i.e.
192.168.100.252
3.
Start your WEB browser. In the Address box, enter the following:
HTTP://192.168.100.252
The configuration menu is divided into four categories: Status, Wireless, TCP/IP, and Other settings.
Click on the desired setup item to expand the page in the main navigation page. The setup pages
covered in this utility are described below.
4.2 Status
In this screen, you can see the current settings and status of this Access Point. You can change settings
by selecting specific tab described in below.
4.2.1 System