AirLive WMM-3000AP User Manual

Page 35

Advertising
background image

AirLive WMM-

3000AP User’s Manual

32

6. The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install

procedure and restart your PC to enable the TCP/IP protocol.

A.2 Set TCP/IP Protocol for Working with NAT Router

1. Click Start button and choose Settings, then click Control Panel.

2. Double click Network icon. Select the TCP/IP line that has been associated to your network card in

the Configuration tab of the Network window.

3. Click Properties button to set the TCP/IP protocol for this NAT Router.

4. Now, you have two setting methods:

Advertising
See also other documents in the category AirLive Accessories for video: