AirLive WLA-9000AP - Manual (Page 21)

3. Configuring the WLA-9000AP
AirLive WLA-9000AP User’s Manual 14
Command Line Interface (Telnet):
WLA-9000AP can be managed through the
command line interface (CLI). It is possible to write a text script file, and then paste
it into the CLI to execute several commands at once. However, Telnet does not
encrypt its message. Therefore, it is not secure. The default Telnet management
port is TCP port 23.
To use the CLI, please open the command line window. Then type “telnet
192.168.1.1” to start.
When asked for password, please enter “airlive”.
To get a list of available command and their usage, please type “help” on the
command prompt.
Secure Shell (SSH, SSH2)
: SSH is an encrypted Command Line Interface that
allow user to send text commands through SSL encryption. Therefore, it provides
the added advantage of security comparing to Telnet. As with Telnet, the SSH and
For more information about Web Management and HTTPS, please make sure to
read through “Introduction to Web Management” in this chapter, Chapter 4,
and Chapter 5