AirLive WN-200USB - Manual (Page 11)

2. Installing the WN-200USB
AirLive WN-200USB User’s Manual 8
Wireless connection is established, good signal reception.
Wireless connection is established, normal signal reception
Wireless connection is established, weak signal reception
No connection to the WN-200USB.
The WN-200USB is unplugged.
2.5 Hardware Installation
Please follow the following instructions to install your new wireless network card:
1. Insert the WN-200USB into an available USB 2.0 port of your PC/Notebook when
PC/Notebook is power-on status. Never use force to insert the WN-200USB, if you feel
it’s stuck, flip the dongle over and try again.
2. Once inserting the WN-200USB properly, the icon in system tray will change from
“unplugged” status to “wireless connection is established” status.