Hardware installation – AirLive WN-250USB User Manual
Page 8
Advertising
1. Introduction
3
WN-250USB User’s Manual
1.3. Hardware Installation
y USB
Connector
y
Connector Cap (To protect the USB connector when not installed)
y
Link/Activity LED (Green)
LED
Mode
Status
Flash
Linked to a wireless AP / transferring data
Link/
Activity
Off
No link to any wireless AP / non active
With the computer switched on, insert the WN-250USB adapter into an empty USB
2.0 port.
Caution: Never use force to insert the adapter.
Advertising