AirLive WN-301USB - Manual (Page 38)

WN-301USB User’s Manual 32
2.10. WMM
This screen enables you to configure WMM (Wi-Fi Multimedia) and other QoS settings, such as
Power Save and Direct Link Setup.
WMM Enable:
Click the check box (then click “Apply”) to enable the WMM function, which then lets you configure
the WMM Power Save and Direct Link Setup functions.
• WMM – Power Save Enable: Click the check box to enable, then click “Setting” to further configure
the function as “AC_BK,” “AC_BE,” “AC_VI” or “AC_VO.”
• Direct Link Setup Enable: Click the check box to enable, then click “Apply” to further configure the
function (all within the Direct Link panel).
- MAC Address: Specify the MAC address of the client adapter you want to direct link to and click
“Apply” to add to the DLS Status table (below).
- Timeout Value: Specify the timeout value for the direct link being set up.