AirLive X.USB - Manual (Page 14)

2. Software Installation-Windows
9 X.USB User’s Manual
2.1 Windows Configuration – Mode Setting
X.USB is a Dual-band adapter that supports 2.4GHz (802.11b/g/n) and 5GHz
(802.11a) frequency. After the driver installation, X.USB will detect 2.4GHz and
5GHz signal frequency automatically. However, if you would like to connect or site
survey specific signal frequency, please refer to the below steps to adjust the
adapter settings.
Example1: Put USB to connect only with 2.4GHz network
1. Go to X.USB Wireless Network Connection and click on “Configure”