Allen&Heath Scepter USER GUIDE - Manual (Page 21)

Audio Owner Manual Section 2
INPUT
INSERT
DIRECT
OUT
INPUT CHANNELS
INDIVIDUAL PHANTOM POWER SWITCH
When engaged, turns on the phantom power for that
channel if the Master switch on Front Panel is on.
MIC INPUT CONNECTOR
Female XLR connector used to connect balanced low
(mic) level signals into the channel.
LINE INPUT JACK
Balanced stereo jack used to connect high (line) level
signals into the channel. Will accept balanced or unbalanced
signals.
CHANNEL INSERT JACK
Stereo Jack used to insert signal processing devices
into the channel. The TIP connection is the SEND, and the
RING connection is the RETURN.
CHANNEL DIRECT OUT
Jack for Individual Channel out signals. Normally set as
Post-Fader/Post-Mute.
16