Allen&Heath GS3000 - Manual (Page 27)

GS3000 U SER G UIDE 27
Store a Mute Patch
Select the mutes to be saved in a patch. i.e. Mute LEDs on.
Press


or

to the required patch number.
Press the STORE switch. The STORE LED will illuminate.
The 4 MUTE GROUP switches and RECALL switch will start flashing.
Press the RECALL switch to overwrite the patch.
The RECALL LED will flash once and the STORE LED will turn off.
The patch is now saved.
Recall a Mute Patch
Press


or

to the required patch number.
Press the RECALL switch to select the patch.
The ACTIVE PATCH LED will illuminate.
If a console mute is pressed then the ACTIVE PATCH LED will turn off as the
console mutes are not the same as the stored patch.
If the ACTIVE PATCH LED flashes, then the patch number displayed is not
the last patch recalled.
The ALL Patch
Between patch 127 and 0 is a special patch function called ALL .
This lets you overwrite all 128 patches with the current console mute settings.
You would normally do this before programming the patches for a new
recording session.
Typical applications would be:
Turn all mutes off in all patches (clear), then edit the mutes on for required
channels.
Turn all mutes on in all patches (set), then edit the mutes off for required
channels.
Turn unused channel mutes on before editing the used channels.
Turn mostly muted channel mutes on before editing the patches where they
are not muted.
Note that the ALL function overwrites all 128 patches and should be
used with care. A confirm function is included to prevent accidental
operation.
Overwrite All 128 Patches
Operate the mutes to set up the console as required. You may wish to start by
clearing or setting all mutes as described previously.
Press


or

until the ALL patch is displayed.
Press the STORE switch. The STORE LED will illuminate.
The 4 MUTE GROUP switches and RECALL switch will start flashing.
Press the RECALL switch. The RECALL switch flashes only.
The STORE LED will flash.
Press the RECALL switch again to confirm the all patch overwrite.
The RECALL will flash once. The patch is now saved.
PATCH CHANNEL
AUTO
MIDI ACTIVE
AUTO
MIDI CH


CLR ALL
DUMP


SHIFT



INCREMENT
HOLD FOR SHIFT FUNCTION