Allen&Heath GS1 USER GUIDE - Manual (Page 10)

1
2
3
4
M ETERS
The main output fader sets the level to the master 2 track recorder. The Hi/Lo
switch alters the meter sensitivity to enable correct level setting. The Hi setting is
for interfacing with professional equipment operating at +4dBu. Lo is for -10dBu
level operation.
M
ASTER S ECTION
The Monitor Select switches allow the LR mix (Default), the 2 track return, or the
Aux 1 cue mix to be monitored through the speakers.
The speaker mute switch cuts the signal to the studio speakers. This enables the
musician/engineer to perform and to engineer in the same room using
Headphones.
Cue to headphones allows the LR mix to be monitored through the speakers, and
the Aux Cue buss through the headphones. This can be used as a monitor output
for the musician.
M ETERS AND M ASTER S ECTION
16
2
GS1
N OTES
LR FADER
MONITOR
LEVEL
MONITOR
OUTPUT
MUTU
CUE TO
HEADPHONES
L
R
MIX
BUSS
L
R
MONITOR AMP &
SPEAKERS
3
4
-5
0
+5
+10
MASTER SECTION 2 TRACK OUT
(MAIN OUT)
MONITOR SELECT
AUX 1
(CUE)
2 TRACK
LEVEL
MASTER
AUX 1
BUSS
2 TRACK
IN
= LR
= 2 TRACK
= AUX 1 (CUE)
2
HI/LO
1
METERS
15
S ECTION 2 S IGNAL P ATHS