Bosch MON170CL - Manual (Page 10)

EN | 10
Bosch Security Systems | 6 July 2005
MON170CL | Instruction Manual | Operation
Color Temp. (For CVBS/S-VIDEO only)
Tint: Adjusts the tint value (NTSC only).
(0-100)
Color: Adjusts the color value. (0-100)
5.8 Ventilation
To prevent overheating, ensure that the ventilation
openings on the rear of the monitor are not covered.
6.0 OPERATION
6.1 Front Panel Controls (Figure 1)
(i) Input • Press this button to display the input
signal which is selected on the screen
• Press the button to exit OSD menu.
+/- • Press the ‘+ +’ or ‘--’ button to move the
cursor to the targeted parameter in
the OSD main menu.
• Press the ‘+ +’ or ‘--’ button to adjust the
value of the selected parameter in the
OSD sub-menu.
(M) MENU • Press this button to open the main
OSD menu. Use this button to
confirm a value for a parameter in
the OSD Menu.
Power LED • Power on (Green)
Identification • Stand by (Amber)
• Sleeping mode (Flashing Amber)
POWER • Press this button to turn on or turn
off the monitor.
6.2 On -Screen Display (OSD) Menu
6.2.1 CVBS/ S-VIDEO/ VGA Mode
Luminance
Contrast: Adjusts the contrast value.
(0-100)
Brightness: Adjusts the brightness value.
(0-100)
Color Temp. (For VGA only)
Selecting "User" will display the following menu:
R (Red): Adjusts the red color contrast.
G (Green): Adjusts the green color contrast.
B (Blue): Adjusts the blue color contrast.