Allen&Heath GL4 USER GUIDE 1 - Manual (Page 5)

A LLEN & H EATH L TD
GL4 M ULTI -F UNCTION L IVE C ONSOLE
I SSUE : 1 M UTE G ROUP S YSTEM - U SER M ANUAL P AGE : 36
If the Group Mode switch is UP, multiple Groups can be activated. If the Group Mode
switch is DOWN then the Groups are interlocked, e.g. if Group 1 was active, activating
Group 4 would deactivate Group 1.
P REVIEWING M UTE G ROUPS
The GL4 Mute Group system allows you to view your Group settings on the channel
Safe/Preview LEDs before activating them.
E DITING S AFE M UTES
The Gl4 Mute Group system lets you make any of the channel Mutes Safe. A Safe Mute
can only be turned on & off by manual presses. It cannot be controlled by a Mute Group or
by MIDI.
N OTE :
In Edit Safes Mode a channel Mute is not affected when the Mute switch is pressed.
•
Press the Preview Group switch, the LED will start flashing
•
Press a Mute Group switch to select it for preview, it’s LED will
turn On. The Mutes that are part of the selected Group will turn
on their Safe/Preview LEDs
•
To preview another Group, press another Mute Group switch.
•
Press the Preview Group switch again to return to normal
operation, the LED will stop flashing
•
Press the Edit Safes switch, the LED will start flashing
•
Press the channel Mute switches to make Mutes Safe. The
Safe/Preview LEDs of channels that are Safe will turn ON.
•
Press the Edit Safes switch again to return to normal
operation, the LED will stop flashing
•
The Safe channels will now have their Safe/Preview LEDs
turned On.