Allen&Heath DP 1000 USER GUIDE - Manual (Page 46)

Default
FX1 WET controls = Channel wet/dry balance
Insertion type effect (insert signal path)
Wet = How much signal is routed through the effect
Dry = How much signal is routed direct to LR
Individual controls for CH1 to 8, FX2
25 steps from 0 (all dry) to 99 (all wet)
PARAMETER controls
Up to 4 parameters for each effect
Refer to Effects table
PRESET type
1 of 40 named presets
Includes echo and modulation effects
0
Refer to table
M ECHO 1
Refer to table
FX2 LEVEL controls = Channel effects sends
System type effect (send / return signal path)
How much signal is routed to the effect
Individual controls for CH1 to 8, FX2
25 steps from Off to 0dB
PARAMETER controls
Up to 4 parameters for each effect
Refer to Effects table
PRESET type
1 of 40 named presets
Includes reverb and delay+reverb effects
Off
Refer to table
HALL 1
Refer to table
AUX LEVEL controls = Channel aux sends
Individual controls for CH1 to 8, FX1, FX2
25 steps from Off to +6dB
PRE/POST FADE
Global selection of sends pre or post channel faders
Off
PRE FADE
FB LEVEL controls = Channel foldback sends
Individual controls for CH1 to 8, FX1, FX2
25 steps from Off to +6dB Off
LEVEL TRIM = Channel fader level trims
Individual controls for CH1 to 8, FX1, FX2
19 steps from -15dB to +6dB
ON/OFF = Enable or disable the trim function
Off or On
0dB
On
PAN Positions mono signal between left and right in LR mix
Balances left and right stereo signal in LR mix
Individual controls for CH1 to 8, FX1, FX2
19 steps from L9 to C to 9R
Off
C (centre)
7 - 2 icon
SERIES