Blaupunkt DJ50 - Manual (Page 19)

40
Stopping the MIX function
➮
To stop the MIX function, press 5
MIX
>
repeatedly until “MIX OFF”
appears briefly in the display and
MIX no longer lights up.
Scanning all of the tracks on all
of the CDs (SCAN)
➮
To scan all of the tracks on all of
the CDs in ascending order, press
OK
;
for longer than two sec-
onds.
“SCAN” will appear in the display.
Stopping the SCAN function
➮
To stop the SCAN function, press
OK
;
briefly.
The track currently scanned will contin-
ue playing.
Note:
It is possible to adjust the scan time. For
more information, read the section on
“Adjusting the scan time” in the chapter
on “Radio Operation”.
Interrupting playback (PAUSE)
➮
Press 3
>
.
“PAUSE” will appear in the display.
Stopping PAUSE
➮
Press 3
>
during the pause.
Playback will resume.
CLOCK
Displaying the clock briefly
In the radio mode
➮
To display the time briefly, press
/ DIS
7
briefly.
In CD player and CD changer mode
➮
To switch between the display of
the CD number, playing time and
the time, press
/ DIS
7
once or
repeatedly.
Altering the permanent display
➮
To make the time or another dis-
play as described above perma-
nent, press and hold
/ DIS
7
until the desired information ap-
pears in the display.
Setting the time
➮
To set the time, press MENU
8
.
“MENU” will appear in the display.
➮
Press
:
until “CLOCKSET” ap-
pears in the display.
➮
Press
:
.
The time will appear in the display. The
minutes will flash and can be altered.
➮
Press or
:
to alter the min-
utes.
➮
Once you have altered the minutes,
press
:
. The hours will begin to
flash.
➮
Press or
:
to alter the hours.
➮
Once you have set the time, press
MENU
8
or OK
;
twice.
CLOCK CD CHANGER OPERATION