Allen&Heath GLD-80 - Manual (Page 3)

GLD User Guide 3 AP8561 iss.4
IMPORTANT - Read these instructions before starting:
Safety instructions
Before starting, read the Important Safety Instructions printed on the sheets supplied with the
equipment. For your own safety and that of the operator, technical crew and performers, follow
all instructions and heed all warnings printed on the sheet and on the equipment panels.
System operating firmware
The function of the GLD is determined by the firmware (operating software) that runs it. Firmware
is updated regularly as new features are added and improvements made. This guide relates to
Version 1.4 firmware.
The latest firmware can be downloaded from the Allen & Heath web site, transferred to USB key
and then loaded into the GLD mixer using the Firmware Update utility. If the AudioRack firmware
is different to that running on the mixer it is automatically updated by the GLD mixer when the
mixer powers up.

Check the Allen & Heath web site for the latest version of GLD firmware.
Software licence agreement
By using this Allen & Heath product and the software within it you agree to be bound by the terms
of the relevant
End User Licence Agreement (EULA), a copy of which can be found on the Allen
& Heath website in the product's pages and in the About section of the GLD built-in Help Manual.
You agree to be bound by the terms of the EULA by installing, copying, or using the software.
Further information
For further information about the GLD please refer to the user guides associated with each
system component. Also refer to the
GLD Touch Screen Reference Guide available on the web
site, and use the on-screen Help Manual available on the GLD-80 surface. Refer to the Allen &
Heath web site for additional downloads, resources, knowledgebase and technical support.
General precautions

To prevent damage to the controls and cosmetics, avoid placing heavy objects on the
control surface, obstructing movement of the motorised faders, scratching the surface or
touch screen with sharp objects, or rough handling and vibration.

Protect the equipment from damage through liquid or dust contamination. Avoid dust or
small objects getting into the fader slots. Cover the mixer when it is not being used for a
long period.

Computer and touch screen technology can be affected by extreme cold. If the
equipment has been stored in sub-zero temperatures allow time for it to reach normal
operating temperature before use at the venue. Recommended operating temperature
for GLD is 5 to 35 degrees Celsius.

Avoid using the equipment in extreme heat and direct sunlight. Make sure the mixer and
rack ventilation slots are not obstructed and that there is adequate air movement around
the equipment.

Transport the GLD using a touring grade, purpose designed flightcase with adequate
foam lining and internal support for protection.

Clean the control surface with a soft brush and dry lint-free cloth. Avoid the use of
chemicals, abrasives or solvents.

It is recommended that servicing is carried out only by an authorised Allen & Heath agent.
Contact details for your local distributor can be found on the Allen & Heath web site.
Allen & Heath do not accept liability for damage caused by maintenance, repair or
modification by unauthorised personnel.