Allen&Heath XONE 4D - Manual (Page 25)

Allen & Heath 25 XONE:4D User Guide
7
8
Channel Meter
Displays the channel signal level. It is post-
EQ and pre-fader. This means it is not
affected by the EQ or fader position.
The channel level control should be set so
that the meter averages around ‘0’ with
loudest peaks no higher than ‘+6’. Turn
down the level control if the +10 peak
indicator lights.
7
Channel Fader
A high quality, smooth travel dual-rail fader
adjusts the channel signal level from fully off
to fully on.
8
MIXER SECTION — CHANNEL INPUT