Allen&Heath XONE 22 - Manual (Page 10)

10
REAR PANEL CONNECTIONS
Phono inputs
For connection to turntables only; this input has RIAA equalization for
moving magnet cartridges.
Note: these inputs can be converted to Line with internal jumper links
Effects SND output
Connect this output
to the input of an ex-
ternal effects unit.
Line input
For connection to
a line level device;
(CD players etc)
Line input
For connection to
a line level device;
(CD players etc)
Effects RTN input
Connect this input to
the output of an
external effects unit.
PSU connection
To prevent damage to
your Xone:22 only use
an A&H approved
power supply
Headphone output
Rear mini jack output
Main outputs
Connect these to a PA
amplifier using profes-
sional balanced XLR con-
nectors for maximum
hum and noise rejection.
Do not short either
pins 2 or 3 to ground.
For unbalanced opera-
tion use pin 2 only and
leave pin 3 floating.
Failure to observe this
could result in damage
to your Xone:22
Monitor output
Connect to a powered
speaker or Hi-FI system
Record output
Use to record your mix.
Connect to a Minidisk re-
corder, cassette deck or
computer, etc
Grounding post
Mainly used to con-
nect the ground wire
from some turntables
to minimise hum