Allworx 9102 Phones - Manual (Page 11)

Phone Guide – 9102 / 9112
4 Button Operation
Button Light Purpose
Keypad None Use the keypad to dial numbers in order to place a call.
Messages Solid red if new
messages are present. Access the Message Center.
Transfer Solid red until the call is
transferred. Transfer a call to another extension using a Blind or an Attended
Transfer.
Conference Blinking green while
making connections
Solid red when in use.
Talk to 3 parties at a time using the 3-Way Conference functionality.
Intercom Solid green when in
use. Use the phone as an intercom.
Release None Disconnect with the call you are on currently.
Info
(9112 only)
Solid green when in
use. View functionality of all the buttons on the phone: Feature Keys,
Programmable Function Keys (PFK), Scroll Keys, Selection Keys, and
Keypad.
Speaker Solid green when in
use. Use the phone as a speakerphone or activates a headset.
Solid red when Mute. Turn off the microphone in handset, speakerphone, or headset.
Solid amber in Do not
Disturb mode. Prevent incoming calls (Do Not Disturb).
Mute/DND
Flashing amber. Indicate Presence other than “In Office”
Hold Solid red if the call is
on hold. Place a call on hold.
Navigation None Use the up arrow to move up on the LCD screen. Use the down arrow
to move down. Use the button in the center to Select and Save
settings.
Soft key
Selection None Use the buttons below the display to select a soft key.
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007Allworx Corp. All rights reserved. Allworx is a registered trademark of Allworx Corporation. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: October 10, 2007
Page 7