AMMCO 7000 Disc Rotor Lathe - Manual (Page 8)

2 • AMMCO 7000 Brake Lathes
Brake Lathes
Lathe Operation
Operating Specifications
Cross Feed Speed Infinitely Variable
0.002 in./rev. to 0.006 in./rev.
(0.051 to 0.152 mm)
Spindle Speeds:
Pulley: Inner Groove 100 RPM
Middle Groove 150 RPM
Outer Groove 200 RPM
Spindle Diameter 2-718" (73.02 mm)
Capacities:
Maximum Brake Rotor Diameter (3/8" Thick Rotor) 19-3/4"
Maximum Brake Rotor Diameter (1-3/4" Thick Rotor) 20-1/2"
Maximum Rotor Thickness 1-3/4" (44.45 mm)
Maximum Arbor Load
1 Inch Standard Arbor 100 lbs. (45.4 kg.)
1.875 Inch Optional Arbor 200 lbs. (90.7 kg.)
Shipping Weight (Lathe Only) 315 lbs. (143 kg.)
Electrical Requirements 115 VAC, 60 Hz, I Ph, 14 amp - standard
220 VAC, 60 Hz, I Ph, 7 amp - optional
(Unless Otherwise Specified)
Floor Space Requirements 48 in. wide x 34-3/4 in. deep
(When Mounted On Optional Bench) (1219.20 mm x 882.65 mm)