AMMCO 8899 Tool Kit for Non-vented Rotors - Manual (Page 2)

Item Part No. Qty. Description
1 906914 2 Tool Bits, Six-edge Carbide
2 910701 1 Tool Bit Assembly, RH
Bit, Screw & Holder
3 910702 1 Tool Bit Assembly, LH
Bit, Screw & Holder
4 910651 1 Tool Bit Assembly, RH
910650 1 Tool Bit Assembly, LH
(Not Shown)
5 909249 2 Screw, Set
6 906841 2 Pin
7 910711 1 Extractor, Spring
8 906905 2 Spring
910710 08/06 2 of 2 © COPYRIGHT 1986 HENNESSY INDUSTRIES AND AMMCO TOOLS ALL RIGHTS RESERVED PRINTED IN U.S.A.
No. 908899 Tool Kit for Non-vented Rotors
Replaces Standard Cutting Tools.
1 1
Remove standard cutting tools
from model 6900 & 6950…
…by disconnecting
springs with the AMMCO
spring extractor.
2 2
Insert new cutting tools.
3 3
Reconnect Springs.
Insert brass plugs and
turn knobs IN.
Adjust guide screws for
smooth tool holder
movement.
Note: Under each lock
knob there is a brass
plug or brass gib.
Remove knobs &
plugs when replacing
tool holders.