Anchor EVENT SERIES - PROFILE SIZE: 220MM X 100MM, INSTRUCTION SUPPLEMENT - AMBASSADOOR WITH VINYL WALLS INSTALLATION - Manual (Page 3)

Figure 4
Step 2: Vinyl Wall Installation
1. Slide side kedar strips into uprights.
Side Kedar Strip
Kedar for attachment to
Ambassadoor
ELEVATION
Outside View
Kedared, velcroed vinyl strip
attached to inside of wall.
Side Kedar Strip
Plastic ball hooks for
attachment into eave
purlin inside channel.
2. Insert plastic ball hooks into inside channel of eave purlin. Slide vinyl evenly across mid. Note: Door adapter assembly
clamp must be disengaged temporarily so that ball hooks may be slid evenly across the mid bay.
3. Slide kedar for attachment to Ambassadoor down into channels as noted in Figures 3 and 4.
4. Remove kedared velcroed vinyl strip from inside of vinyl wall and slide into top channel of Ambassadoor as shown in
Figure 3.
5. Fasten kedared velcroed vinyl strip to inside of vinyl wall.
6. Lace side kedar strips to vinyl piece attached to eave and ambassadoor.
Kedar for attachment to
Ambassadoor