Anchor CENTURY MAXI-GRIP USE AND CARE INSTRUCTIONS User Manual
Page 2

After each and every Tent washing, follow these instructions:
•
Completely rinse with plain water and wipe with sponge to remove any detergent residue. This step is critical to the
effective functionality of Maxi-Grip.
•
Allow to thoroughly dry.
•
Apply 303 Aerospace Protectant as noted on previous page under “Care of Maxi-Grip.”
•
Too many electrical cables inside the lace fl aps may put tension on Maxi-grip. There should be NO tension on Maxi-Grip.
•
Contaminants of any sort may inhibit the functionality of the Maxi-Grip. Maxi-Grip must be clean and protected to work
properly. Check condition of Maxi-Grip periodically. See Care of “Maxi-Grip”
•
Tent Installation may have a bearing on how Maxi-Grip functions. Tent must be properly installed and tensioned. Read
tent installations thoroughly
•
Failure or separation of the Maxi-Grip may be due to improper closing during installation. The Maxi-Grip must be properly
sealed in order for it to perform. If separation occurs, repeat Step 2 of the Instructions.
Care of Maxi-Grip after Washing Tent
Problem Checklist
1100 Burch Drive
Evansville, IN 47733
812.867.2421