APG DST Sensors datasheet - Manual

F l e x i b l e b y D e s i g n
DST Ultrasonic Level Sensors
The DST series ultrasonic sensors are designed to be used in conjunction with the DCR controllers to
give you a simplified, stand-alone system. The transmit and receive circuit is built into the sensor
and digitally communicates the detected distance to the DCR controller. This allows the sensor to be
separated from the DCR controller by up to 2000 feet with no signal loss. With several sensors to
choose from, there are plenty of options for your application needs.
Features
• AutoSense software provides hassle-free setup
• Internal Temperature Compensation
• Controller and sensor can be separated up to 2000 ft. (650 m)
Automation Products Group, Inc. www.apgsensors.com
tel. 888.525.7300 [email protected]