Aquascape AquaBlox (29492) - Manual (Page 7)

7
Proper Orientation : The AquaBlox ® must be installed with the correct orientation to ensure maximum load bearing capacity. See images below.
Note: When stacking AquaBlox ® only one panel “A” is required between the two joined AquaBlox ® . See tank assembly instructions for more detail.
Install AquaBlox ® in the storage basin, butting them tightly against each other. After placement of the tanks, bring the inner geotextile (if using) up the
sides of the tanks. For the RainXchange ® Water Storage Kits please refer to the RainXchange ® Water Storage Kits diagram that is being installed for the
proper tank configuration.
17.5”
16”

9.5”
16”

16”
9.5”

16”
17.5”

UP
Step 8: Install AquaBlox ®
Tank Module Orientation