Led indicators, Configuration and setting methods, Mechanical dimensions (unit=mm) – Atop Technology EH2304-PR User Manual

Page 2: Warranty policy, Pin assignment of network connections

Advertising
background image

LED Indicators

There are four LED indicators located at the front panel of EH series.

10/100BaseT(X) Ethernet Port Connection

RJ-45

Pin
Signal

1 2 3 4 5 6 7 8

Name
P1/P2

RJ-45

LED

Green

Green

Yellow

Status

Power input 1/2 is not plugged yet
Power status is ready
Link is broken, or no cable is plugged in
The Port is linked
The device is transferring data through the port
The link is operating at rate of 10 Mbps
The link is operating at rate of 100 Mbps

Configuration and Setting Methods

Any settings or configurations are unnecessary.

Pin Assignment of Network Connections

RJ-45(8-pin) to RJ-45(8-pin) straight-through cable wiring

1

8

Tx+ Tx- Rx+

Rx-

RJ45(8-pin) to RJ45(8-pin) cross-over cable wiring
10/100BaseT(X) Ethernet Port Connection

Mechanical dimensions (unit=mm)

─ Any change by website in material announcement primarily. ─

1

8

Cable

Description

Off
On
Off
On

Blink

Off
On

Warranty Period

5 Years

RJ-45

Pin
Signal

1 2 3 4 5 6 7 8

1

8

Rx+ Rx- Tx+

Tx-

Warranty Policy

Warranty Conditions

Products supplied by Atop Technologies are covered in this warranty for sub-standard
performance or defective workmanship. The warranty is not, however, extended to goods
damaged in the following circumstances:
(a) Excessive forces or impacts
(b) War or an Act of God: wind storm, fire, flood, electric shock, earthquake
(c) Use of unqualified power supply, connectors, or maintenance procedure
(d) Replacement with unauthorized parts

RMA and Shipping Costs Reimbursement

Customers shall always obtain an authorized "RMA" number from Atop before shipping the
goods to be repaired to Atop. When in normal use, a sold product shall be replaced with a new
one within 3 months after purchase. The shipping cost from the customer to Atop will be
reimbursed by Atop.

After 3 months and still within the warranty period, it is up to Atop whether to replace the unit
with a new one; normally, as long as a product is under warranty, all parts and labor are free of
charge to the customers.

After the warranty period, the customer shall cover the cost for parts and labor.Three months
after purchase, the shipping cost from the customer to Atop will not be reimbursed, but the
shipping cost from Atop to the customer will be paid by Atop.

Limited Liability

Atop shall not be held responsible for any consequential losses from using Atop’s product.

The warranty certification will not be effective until an authorized stamp issued by
Atop’s overseas agents.

Purchase Date: / / (yyyy/mm/dd)

Serial Number:

Atop Customer Services and Supports

1. Please contact your local dealers or Atop Technical Support Center at the
following numbers.

+ 886-3-550-8137 (Atop Taiwan)
+ 86-21-6495-6232 (Atop China)

2. Please report the defected problems via Atop’s Web site or E-mail account

Web Site:www.atop.com.tw, e-mail:[email protected]
Web Site:www.atop.com.cn, e-mail:[email protected]

Warranty

3 Years

1 Year

Warranty

Product Categories

Ethernet Switches
Wireless
Serial Device Servers
Modbus Gateways
Embedded Device Servers

Product Categories

DIN-Rail Power Supplies
Power Adaptors
Antennas

Other Accessories

Top view

Side view

Front view

Rear view

EH2304-PR

22.50

Front view

Top view

Side view

Rear view

EH2308-PR

Advertising
This manual is related to the following products: