Bush Hog TOUGH SqUealer Series - Manual (Page 3)

1. TOUGH Below Deck Structure delivers water
and debris shedding capabilities of sloped deck and Bush
Hog’s famous strength. Integral strong backs tie front
leading edge to rear band.
2. TOUGH Side Bands with welded skids are con-
tinuously welded and tied together through the integrated
gearbox stand.
3. TOUGH rear Band is continuously welded and
curved to resist bending going forward and backing up.
4. TOUGH 3-Point Tail wheel Frame is built to
resist side loads during turns that can over stress cheaper
in-line designs.
5. TOUGH Original Bush Hog Design
that made Bush Hog rotary cutters famous for power,
durability and reliability. Power, durability and reliability are
delivered year after year by Bush Hog’s stump jumper pan
that lifts over obstructions and free-swinging blade that is
held in position by one of nature’s basic phenomena--
centrifugal force.
6. TOUGH Genuine Bush Hog Blades.
Made especially for Bush Hog, and featuring the unique
Bush Hog brand, they are forged and heat treated for
long-lasting sharpness.
7. TOUGH world-Famous Bush Hog
Gearboxes
are stamped with the Bush Hog brand
for easy recognition. Classic Bush Hog gearbox design
increases life span with shear pin or slip clutch protection
proven in more than 150,000 Bush Hog rotary cutters.
Tapered roller bearings and splined output shaft resist
thrust and side loads as the pan pushes cutter up or to
the side of large obstacles such as rocks or stumps.
8. TOUGH laminated Tail wheel.
Same laminated rubber tail wheel featured on
larger Bush Hog cutters that clear fields.
9. TOUGH Full length Skids.
1/4-inch skids
run one-half the length of the deck to protect side
bands and add strength that resists bending.
Bush Hog TOUGH Features
Mean Superior Performance
That Lasts For Years
9 Bush Hog TOUGH Features
Cutter Size Gauge of Deck Depth of Side Band
42-inch 11- gauge 9 3/4 -inches
48-inch 11- gauge 10-inches
60-inch 11- gauge 9 3/4 -inches
72-inch 10 - gauge 9 3/4 -inches
84-inch 10 - gauge 10 1/4 -inches
84-inch twin gearbox 11 - gauge 7 3/8 -inches