Usage recommendations, Trouble shooting, Problem cause to investigate – Bakers Pride EP-2-2828 User Manual

Page 8

Advertising
background image

5. USAGE RECOMMENDATIONS

1.

Pre-heat the oven thoroughly before use. Allow one hour and fifteen minutes for pre-heat.

2.

Pre-heat ovens @ 75°F (24°C)

desired cook/bake temperature.

3.

Do not move baking location in the middle of a bake, but spinning is okay.

4.

Keep decks clean of flour, cheese, etc using a deck/scraper brush.

5.

During idle periods, reduce heat by 75°F (24°C).

6.

Minimize water content of products for faster cook/bake times.

7.

For larger & thick products, reduce temperature & increase bake/cook time.

8.

Cooking times and temperatures will vary depending upon such factors as size of the load,

temperature, mixture of products (particularly moisture) and density of products.

9.

Keep a record of the times, temperature and load sizes you establish for various products.

Once you have determined these, they will be similar for succeeding loads.

10.

When practical, start cooking the lowest temperature product first and gradually work up to the

higher temperatures.

11.

When loading the oven, work as quickly as possible to prevent loss of heat.

12.

Oven will continue to heat even though the timer goes off. Product should be removed from the

oven as soon as possible to avoid overcooking.

13.

When baking, weigh or measure the product in each pan to assure even cooking.

14.

Only bread and pizza may be placed directly on a stone baking hearth.

BELOW

6. Trouble Shooting

There are no user serviceable components under the covers. Contact your service agent.

No power on - lights do not

come on, oven does not heat-up

No cavity heat - oven lights

come on, elements do not heat up

Uneven heat

Oven won't reach temperature

No power to oven - check supply voltage

Circuit breaker tripped - reset and check oven for fault condition

High temperature thermostat tripped - reset and check oven for

fault condition

Circuit breaker tripped - reset and check oven for fault condition

Thermostat faulty - replace

Contactor faulty - replace

Bad element - replace

Infinite control thermostat faulty - replace

Bad element - replace

Thermostat faulty - replace

PROBLEM

CAUSE TO INVESTIGATE

8

Each cavity has a timer that may be used when cooking product. The timer DOES NOT control the oven.

To set a cook time turn the dial clock wise to the desired setting. The timer will count down until the time

expires. A buzzer will sound continuously until the dial is turned to the “OFF” position slightly to the left of

“0”.

Advertising