Bear Archery Compound Bow 2013 - Manual (Page 18)

18
CAM ADJUSTMENTS
H13 Synchronized Hybrid Cam System
In order for the H13 Synchronized
Hybrid Cam system to operate at
maximum efficiency the timing
needs to be set correctly. This
means that the top and bottom
cams roll over and hit their
respective draw stops at the same
time. The H13 Cam timing is set
during assembly at the factory, but
once the bow is broken in, or if
you change strings/cables it is
possible that the cam timing will
need to be checked.
If the H13 Cam System is out of
time and the top stop hits before
the bottom stop, put more twists
into the control cable until both
stops hit at the same time. If the
H13 Cam System is out of time,
and the bottom stop hits before
the top stop, take twists out of the
control cable until both stops hit at
the same time. The high quality
string materials used in your Bear
Bow will exhibit very little stretch
and should maintain proper timing
for extended periods under normal
use.