Bear Archery Compound Bow 2012 - Manual (Page 10)

10
CARE AND
MAINTENANCE
With proper care and a minimum amount of
routine maintenance, your bow will be kept in
top condition. However, it is still important to
carefully inspect your bow on a regular basis.
Cleaning
Your bow should be kept clean of dust, mud and
grime. Use a damp soft cotton cloth to remove
dirt and moisture. Do not use solvents such as
acetone or mineral spirits as they may ruin the
finish.
Storage and Transportation
Avoid exposing your bow to temperatures over
150 degrees. Excessive heat may damage your
bow. Do not leave your bow unprotected in your
vehicle on a hot sunny day or store in a hot attic
or other hot enclosed area. Clean your bow
thoroughly after each use. Never put your bow
away wet or store it in a damp place. Lightly oil
all steel parts (axles, mounting screws) to prevent
rust. You can relax the limbs if storing for more
than a year. Follow the instructions under Peak
Draw Weight Adjustment in the bow adjustment
section.
Bow Presses
Use only “double-pull” type APPROVED bow
presses. A “double-pull” bow press draws your
bow down at two points on the riser. Older style
“single-pull” bow presses that contact the bow
only in the grip area can result in bent or broken
risers.
To reduce unnecessary stress on the riser, back
off the limb bolts 2-3 turns before placing in a
press. See page 4 and/or
www.BearArcheryProducts.com for additional
bow press information.