Bear Archery Compound Bow 2008 - Manual (Page 8)

15
CAM ADJUSTMENTS
Back View
Front View
Module
Draw Stop
MUST
FACE
OUT
“+”
Post
Standard
“dot”
Post
Module
Mounting
Screws
Draw
Stop
Screws
Standard
“dot” Post
“-“
Post
Draw stop
increments
must match
module
number
Module
number
Perimeter
Weight
16
CAM ADJUSTMENTS
Adjusting Draw Length – Modular Single
Cam
The modular single cams have a modular draw
length adjustment. Most draw length adjustments
can be made without the use of a bow press.
Draw length changes are made by simply
changing modules. Accessory modules are
available from your local Bear Archery dealer in
one-inch draw length increments. Each module is
numbered, with #2 being the longest draw length
and #8 being the shortest. To change modules
remove the socket head cap screws from the
present module, remove that module and replace
with a new module. Such module draw length
adjustments will not affect peak draw weight.
Additionally, fine draw adjustments of up to ½
inch can be made by repositioning the Brass
bowstring mounting post near the center of the
cam. To make such adjustments, it is first
necessary to remove tension from the harness
system of the bow by compressing the bow in a
bow press. A fixed or portable bow press must
be used! Under NO circumstances can this
relaxing of the harness system be
accomplished by simply backing out limb
bolts. Pulling more bowstring up into the cam
will reduce draw length. Letting it out will
increase draw length.
Back View Front View
Adjustable
string post
Module number
engraved in module
Module
mounting
screws
Module
Cam