Bedrug JEEP KITS: BedRug for Jeep CJ7/YJ - Manual (Page 8)

BEDRUG, INC.
n
635 Old Hickory Blvd, Old Hickory, TN 37138-3162
n
800-462-8435
n
bedrug.com
installing Cargo area Floor
NOTe: For jeeps with a rear seat, trimming will be necessary to fit around seat mount and seat belt
attachment points. There are score lines on the back of the part to use as a guide.
10. With the rear seat removed, place the floor piece into position. Cut holes in floor piece if rear seat and
seat belts are present, using marks on back of part as a guide. (Fig. 7 and Fig. 8) Lift the floor piece
and pull the seat belts thru the holes.
11. Now pull up floor piece at the front side to access the hook fastener. Clean surface with alcohol then
remove the film backing from all of the locations behind the rear seat and roll the floor back into place.
Firmly press the top surface to ensure adhesive attachment. (Fig. 9 and Fig. 10)
Jeep Wrangler CJ-7/YJ Bedrug Install Instructions
CJ-7/YJ
8. Now pull back the front of the wheel well piece, clean surface with alcohol remove the tape backing
and press firmly back into place. (Fig. 4) Note: Depending on your roll bar mounting location, use
the indicator marks on the back of the wheel well piece as a guide to make cuts for the seat belt
mounts as well as flange and roll bar cutouts. (Fig. 5 and Fig. 6)
9. Repeat steps 5 thru 8 for the passenger side wheel well.
FIguRe 3:
FIguRe 5:
FIguRe 4:
FIguRe 6: