Bushnell 78.9565 - Manual (Page 9)

TROUBLESHOOTING GUIDE
If after you have set-up your new telescope you are unable to see any objects, use this Quick
Reference guide to help you to understand the cause of the problem and quickly determine a remedy
1. I’ve completed the set-up yet I cannot see anything • Check to see if objective lens cover has been
removed.
• Try to view an object that is 200 or more yards
away.
• If there is more than one eyepiece included with
the telescope, use the lowest power (highest
number) eyepiece to begin viewing.
• Use the Rack & Pinion Focusing Mechanism (3) to
bring the object you are trying to view into focus
Intended Configuration Diagram