BKI COq Convection Oven - Manual (Page 34)

Convection Oven Component Replacement
32
Heating Elements
1. Disconnect the oven power supply by turning OFF the circuit breaker in the power supply service panel.
2. Remove the back panel and fan cover from the oven.
3. Disconnect the wires on the failed Heating Element from the back of the oven. Remove the (2) screws
mounting the failed Heating Element from inside the oven.
4. Carefully pull the failed Heating Element away from the back of the oven.
5. Slide a new Gasket over the terminal ends of the Heating Element and set the replacement Heating
Element in position in the oven.
6. Secure the Heating Element to the back of the oven with the two mounting screws.
7. Connect the wires to the replacement Heating Element from the back of the oven. Refer to the diagram
on the previous page for proper connection.
8. Reattach the back panel and fan cover to the oven and turn the power supply to the oven ON.