BKI VGG Rotisserie Oven - Manual (Page 13)

Rotisserie Oven Operation
11
Screen Name Screen Description
Cooking Displays once the COOK button is touched from the
Ready To Cook screen. This screen shows the cooking
temperature, the time remaining in the cook cycle, and
the elapsed time shown with the progress bar at the
bottom of the screen. Hold the X button for 2 seconds to
stop the cook in progress. The EXTRA button can be
used to add more cook time to the cycle. The cook cycle
ends when the cook time elapses. This is indicated by
three 2 second beeps. If a hold temperature was
programmed then the Hold screen is displayed. If no
hold temperature was programmed then the screen will
flash and beep until touched. The highlighted letter H
works as described for the Preheat screen. The T button
works as described for the Preheat/Cook Selection
screen. Touching the X button for 3 seconds returns you
to the Preheat/Cook Selection screen.
Hold Displays once the cook cycle is complete if a hold
temperature was programmed. This screen displays the
hold temperature (or nothing if set to OFF), and the
elapsed time in the hold mode. The EXTRA button is
available here so the product can be cooked for more
time if required. The highlighted letter H works as
described for the Preheat screen. The T button works as
described for the Preheat/Cook Selection screen.
Touching the X button for 3 seconds returns you to the
Recipe Selection screen.
Extra Cook Appears when the EXTRA button is touched from the
Cooking or Hold screens. Use the up and down arrow
buttons to set the amount of additional cook or hold time
in 5 minute increments. Touch the GO button to add the
additional time you set. Touch the X button to return to
the previous screen without adding any extra cook or
hold time.