Other setting 1, Online manual not for resale purposes – BLITZ R-VIT i-Color User Manual

Page 13

Advertising

Other setting 1

①Fuel Press. (Fuel Pressure Control) Compatible only with vehicle s equipped with this function.

1) Select “Fuel Press” at the “Function”.
2) Select “ON” at the “Control” or select “OFF” to keep as stock configuration.
3) Select “Revo” to configure the RPM range to start controlling the fuel pressure.
4) Select Press to configure the fuel pressure (increase or decrease) within –9.9～25%.

※ There if a possibility to damage the engine if the setting of the pressure is too significant. Please adjust

by installing an A/F meter when performing this operation.

②Fuel Injection (Fuel Injection Control) Compatible only with vehicle s equipped with this function.

1) Select

“Fuel

Injection” at the “Function”.

2) Select “ON” at the “Control” or select “OFF” to keep as stock configuration.
3) Configure the RPM range, between 0～3000RPM every 500RPM, to configure the amount of fuel to be

injected (increase or decrease) within ±25%.

※ There if a possibility to damage the engine if the setting of the pressure is too extreme. Please adjust by

installing an A/F meter when performing this operation.

③Fan Control. Compatible only with vehicle s equipped with this function.

1) Select “Fan” Control” at the “Function”.
2) Select “ON” at the “Control” or select “OFF” to keep as stock configuration.
3) Select “ON Temp [℃]” and configure the fan activation temp range between 20～100℃.
4) Select “OFF Temp [℃]” and configure the fan deactivation temp range between 20～100℃.

※ We suggest to configure the ON Temp between 90～95℃ and OFF Temp between 85～90℃ to avoid

over cooling or over heating.

Online Manual Not For Resale Purposes

Advertising