C.B.S. Scientific QNX-700 - Manual (Page 11)

11 www.cbsscientific.com
7
9
3.3 Removing the Gel
1. Turn the power supply off and discon-
nect the leads from the power supply.
Remove the safety cover from the unit, by
placing thumbs on white posts next to red &
black connectors, then pushing down while
pulling up with fingers under lid as shown
in figure 9
. Do not remove safety cover by
pulling up on leads!
2. Pull up on gel door latches, and open gel
door. Remove gel sandwich from cassette
assembles. Stain and fix according to your
preferred method.