CalDigit S2VR HD Quick Installation - Manual

S2VR HD Quick Installation Sheet
Thank you for choosing CalDigit. This
quick installation sheet is for reference
only. Please check the detailed manual on
the provided CD, and also check our
website at
www.caldigit.com for updated
drivers/software.
Product Specification:
Physical Dimensions:
26.30" L X 15" W X 23.25"
H / 263.29mm L X 150mm
W X 232.50mm H
Power: Auto switching 100-240
VAC 47-63 Hz with PFC /
Inrush current 65/130A @
11/220VAC (at 25° ambient
cold start)
Operating temperature: 0-40 degrees C or 32° to
104°F
Weight (net): 20.45lb / 9.28kg
System Requirements:
• PC or Mac with an available PCI-e or PCI-
x slot 500 Mhz or faster**
• CD-ROM Drive
• 1GB of RAM minimum
• Mac OS 10.3.9 or higher
• Windows 2000/XP or higher
** Note: You may be able to install the S2VR
into an older Mac or PC, however the overall
performance will be slower than with newer
systems.
For uncompressed HD video editing,
we recommend a Dual Core G5 with 1Ghz
machine running with 1GB of RAM or better.
Copyright © 2006, CalDigit, Inc. All rights reserved
S2VR Duo S2VR HD, S2VR Pro, CalDigit name and logo are registered trademarks of CalDigit Inc.
All other trademarks are the property of their respective holders.
Package Contents
• S2VR HD
• 5 Hard drive in tray module
• FASTA-4e HBA or FASTA-4x HBA
depending on model. (Host Card)
• e-SATA Cable
• Quick Installation sheet
• Driver CD & Manual
• Power Cord
S2VR Interface:
Host Card Driver Installation:
1. Turn Computer On.
2. Insert CD in CD-ROM drive.
3. Open CD, then open file CalDigit FASTA-
4.pkg by double clicking on it
4. Introduction Screen, CLICK Continue
5. Select OS hard drive as the Destination.
6. Finishing Installation, CLICK Continue .
7. Verify System Profiler