Cambridge SoundWorks S100 MultiPole Surround Speakers - Manual (Page 3)

3
INTRODUCTION
Thanks for choosing a Newton Series surround
loudspeaker. The S100 features the finest drivers,
precision internal crossover circuitry and an elegant
enclosure design.
The Product Development Team at Cambridge
SoundWorks believes there is no better combination of
audiophile-level attention to detail and reasonable cost.
AFTER UNPACKING
Store the shipping carton and packing material for
future use and transport.
CONTENTS
1. Two loudspeakers
2. Two No.10 screws and plastic wall anchors
3. Eight rubber feet
INSPECTING FOR DAMAGE
Examine the speaker system carefully for shipping
damage. If there is any, do not install or use the sys-
tem. Return the speaker to the store where you made
the purchase or call Cambridge SoundWorks at
1-800 FOR-HIFI (1-800-367-4434) for assistance.