Cambridge SoundWorks Ambiance 82 2-Way In-Ceiling Speaker Systems - Manual (Page 2)

T hank you for purchasing an
Ambiance in-wall speaker
system. It will provide natural,
balanced sound reproduction
without taking up space in
your listening room. Their superb
acoustic performance makes them
suitable for use as main speakers in a
home theater or music system.
Ambiance speaker systems are easily
installed by anyone from a profes-
sional installer to a do-it-yourselfer,
while their in-wall design provides
nearly invisible background music.
The off-white finish may be easily
painted to match the surrounding
surface (refer to page 4). Each of the
three models share similar perfor-
mance throughout the critical mid-
and high-frequency range. They differ
primarily in bass extension and
maximum output level. All three
models use the same silk-dome
tweeter for smooth high frequency
reproduction. The tweeter is swivel-
mounted so it can be directed towards
the listening area, and includes a two-
position high frequency level switch
Introduction About This Manual
Care in speaker placement and
installation will pay dividends in
optimum enjoyment. This booklet
provides tips and instructions to
help you get the most from your
loudspeakers. Please read it through
thoroughly before proceeding with
the speaker system installation.
Installing Ambiance speaker
systems is straightforward and may
be performed by an experienced do-
it-yourself homeowner. However,
some familiarity with typical home
construction is necessary.
This manual assumes the
installer possesses skill in the proper
use of hand and power tools, a
knowledge of local fire and building
codes, and a familiarity with the
area behind the surface of the wall
or ceiling where the speakers will be
installed.
Note: Cambridge SoundWorks
will not assume any responsibility
for the integrity of the attachment of
the speaker and its mounting
brackets to a wall or ceiling. The
quality of the installation is solely
1. Stud-finder.
2. Spirit level.
3. Pencil.
4. Drill with
1 /
4
" bit (for plaster walls).
5. Utility knife, jigsaw, drywall router,
or other means of cutting a hole in
the mounting surface.
6. Wire cutter and/or stripper for pre-
paring speaker wires.
7. #1 Phillips screwdriver.
the responsibility of the installer.
Cambridge SoundWorks is not
responsible for any damage
resulting from the installation or
installation process, or due to
wiring or materials used in the
installation.
If you are not comfortable with
performing a speaker system
installation, we recommend you rely
on a qualified home entertainment
installer. Contact your dealer or
Cambridge SoundWorks for
assistance in selecting a suitable
installer.
Tools Required
to adjust the sound to room
acoustics or personal taste. A self-
resetting automatic protection
circuit protects the tweeter from
damage due to overpowering or
excessive distortion. The woofer
drivers use an injection-molded
polymer cone with butyl rubber
surround. The assembly is both
durable and sonically peerless.
1