Cambridge SoundWorks HD P300HD High Definition Powered Subwoofer - Manual (Page 3)

3
LIGHTNING – For added protection for the subwoofer or
control module during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug
them from the wall outlet. This will prevent damage to the
subwoofer or control module due to lightning and power-
line surges.
OVERLOADING – Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
OBJECT AND LIQUID ENTRY – Never use probes of any
kind to reach into the subwoofer or control module as they
may touch dangerous voltage points or short parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the subwoofer, control module or control mod-
ule power supply.
SERVICING – Do not attempt to service the subwoofer or
control module yourself as opening or removing covers
may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE – Unplug the subwoofer
or control module from the wall outlet or other power
source and refer servicing to qualified service personnel
under the following conditions:
a) When the power-cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the
subwoofer or control module.
c) If the subwoofer or control module has been exposed to
rain or water.
d) If the subwoofer or control module does not operate
normally by following the operating instructions; or
exhibits a distinct change in performance.
e) If the subwoofer or control module has been dropped or
damaged in any way.
REPLACEMENT PARTS – When replacement parts are
required, be sure the service technician uses replacement
parts specified by Cambridge SoundWorks or have the
same characteristics as the original part. Substandard
substitutions may result in fire, electric shock, or other haz-
ards.
SAFETY CHECK - Upon completion of any service or
repairs to the subwoofer or control module, ask the service
technician to perform safety checks to determine that the
subwoofer or control module is in proper operating condi-
tion.
READ INSTRUCTIONS – All safety and operating instruc-
tions should be read before the subwoofer is operated.
RETAIN INSTRUCTIONS – The safety and operating
instructions should be retained for future reference.
HEED WARNINGS – All warnings on the subwoofer and in
the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS – All operating and use instruc-
tions should be followed.
CLEANING – Unplug the subwoofer or control module from
the wall outlet or other power source before cleaning. Use
a damp cloth for cleaning.
ATTACHMENTS – Do not use any adapters or attachments
not recommended by Cambridge SoundWorks as they may
cause hazards.
WATER AND MOISTURE – Do not use the subwoofer or
control module near water-for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub; in a wet basement;
or near a swimming pool or other similar areas.
ACCESSORIES – Do not place the subwoofer on an unsta-
ble cart, stand, tripod, bracket, or table. The subwoofer
may fall, causing serious injury to a child or adult and seri-
ous damage to the product.
VENTILATION – Slots, openings and metal fins in the cabi-
net are provided for ventilation, to ensure reliable operation
of the subwoofer and to prevent it from overheating. These
areas must not be blocked or covered such as by placing
the product on a bed, sofa, very deep pile rug, or other
similar surface. The subwoofer should not be placed in a
built-in installation such as a bookcase or rack.
HEAT – The subwoofer should be situated away from heat
sources such as radiators, heat registers, stoves, and other
products (including amplifiers) that produce heat.
POWER SOURCES – The subwoofer or control module
should be operated only from the type of power source
indicated on the label. If you are not sure of the type of
power supply to your home, consult your dealer or local
power company.
POLARIZATION – The subwoofer is equipped with a polar-
ized alternating-current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety pur-
pose of the polarized plug.
POWER-CORD PROTECTION – The AC power cords
should be routed so that they are not likely to be walked
on. No object should bring weight to bear on to the AC
power cords.
IMPORTANT SAFETY INSTRUCTIONS