Caron 6044 - Manual (Page 28)

6024 & 6044 Series Operations Manual Rev F 02/14/12 Page 28 of 56
SECTION 6
– OPTIONAL ACCESSORY OPERATION
Using the Carboy Water System (BOTL301)
To fill the carboy while attached to the chamber, unscrew the cap. Fill carboy with
distilled or deionized water (see Connecting the Water Supply section for details). The
carboy holds 2.5 liters.
If the carboy must be removed in order to fill it up, first disconnect the tubing between
the carboy and chamber by pressing the metal lever at the tubing connects / disconnects
at the bottom of the carboy. Then unscrew the four mounting screws and remove the
carboy. After re-attaching the carboy, connect the tubing by simply pressing the plastic
fittings into each other.
Screw Cap