Carter-Hoffmann HL10-10-RW - Manual (Page 4)

4
UNPACKING AND INSPECTION
This appliance
should be
thoroughly
cleaned prior to use.
See the CLEANING
INSTRUCTIONS in
this manual.
NOTE: DO NOT discard
the carton or other
packing materials until
you have inspected the
appliance for hidden
damage and checked it
for proper operation.
Refer to SHIPPING
DAMAGE CLAIM
PROCEDURE on
bottom of this page.
FREIGHT DAMAGE PROCEDURE
NOTE: For your protection, please note that equipment in this shipment was carefully inspected and packaged
by skilled personnel before leaving the factory. Upon acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY: Regardless of the extent of damage. Contact your dealer
immediately.
3. CONCEALED DAMAGE: If damage is unnoticed until the merchandise is unpacked, notify the transporta-
tion company or carrier immediately, and then file a “CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the date the delivery was made to you. Be sure to retain the
container for inspection.
Carter-Hoffmann cannot assume liability for damage or loss incurred in transit, freight damage is not covered under war-
ranty. We will, however, at your request, supply you with the necessary documents to support your claim.
GROUNDING INSTRUCTIONS
This appliance is equipped with a cord having a grounding wire with a grounding plug which must be plugged
into an outlet that is properly installed and grounded. In the event of an electrical short circuit, grounding reduc-
es the risk of electric shock by providing an escape wire for the electric current.
WARNING—Improper use of the grounding can result in a risk of electric shock. Consult a qualified elec-
trician or service agent if the grounding instructions are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
1. Remove the cabinet from shipping carton, ensuring that all packing
materials and protective plastic has been removed from the unit.
1. Inspect all components for completeness and condition.
2. If any freight damage is present, a freight claim must be filed immediately
with the shipping company.
3. Freight damage is not covered under warranty.
4. Check to insure all components are included: cabinet, instruction packet
and additional accessories.
5. Read operation instructions completely.
6. Appliance should be thoroughly cleaned before use. See CLEANING
INSTRUCTIONS in this manual.
7. Carefully account for all components and accessories before discarding
packing materials. Store all accessories in a convenient place for later
use.
COMPONENTS
Cabinet
10 pair universal pan slides in box; if you ordered the optional fixed angle
pan slides, they are welded to the pan racks on each interior side wall
Plastic amber water reservoir
12”x20”x2.5” stainless steel pan (mount under cabinet for condensation)
2 Drawer insert pans (drawer warmers)
Humitrol racks (if ordered with unit)