CCTV Camera Pros Geovision 8.5 Multicam Digital Surveillance System - Manual (Page 142)

124
4. By default, the login username and password for the IP camera both are set to admin. If the
added IP camera does not use the default settings, you need to right-click the IP camera in the
Dispatch Pattern section and select Login User Information to modify its login information.
5. Repeat steps 3 and 4 to map more IP cameras.
6. To create another set of the IP camera mapping settings, click the Add button on the Dispatch
Pattern toolbar. A new tab (NVR2) is created.
Figure 2-13
7. When you finish selecting the IP cameras, export the IP camera mapping settings.
A. Select the tab of the IP camera mapping settings (NVR1, 2, 3,…) you want to apply and click
the Export button on the Dispatch Pattern toolbar. The Save As dialog box appears.
B. Specify the file name (.ipcd) and the storage path of the IP camera mapping settings.
C. To export more sets of IP camera mapping settings, repeat the steps above.
8. Import the IP camera mapping settings into the GV-System.
A. Close the GV IP Device Utility window, return to the IP Device Setup dialog box and select
Import Camera.
Figure 2-14
9. Locate the storage path of the IP camera mapping settings you want to import and click OK. The
settings are updated to the GV-System.