CCTV Camera Pros iDVR-PRO H Series DVRs - Manual (Page 54)

System Setting
54 |
System Setting
System Setting
You can configure the settings of date/time, system management, and keyboard controller.
\ \ Date/Time
Specify the current date and time.
1. From <SYSTEM SETUP> - <SYSTEM>, select
<DATE/TIME>.
2. Use the [ ▲▼◀▶ /ENTER] buttons on the remote
control or use the mouse to change the time or set
the options as necessary.
i
DATE/TIME : Set the current time and date.
Click< > to adjust the time manually.
i
DATE FORMAT : specify the date format.
i
TIME FORMAT : specify the time format.
i
TIME SERVER : obtain the current time from the
time server. Click < > to get the current time.
i
AUTO TIME SYNC : automatically synchronize the
time with the time server at a specific time.
i
SYNC AT : Set the time to sync with the time
server.
i
TIMEZONE : specify the GMT standard time for
your local area.
i
DST : You can set up or release the DST (Daylight
Saving Time).
 Both <TIME SERVER> and <TIME SYNC> will be
enabled only if the DVR is connected to the Internet.
3. To apply the change, click <APPLY> in the bottom of
the screen.
4. When done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen. The confirmation
message appears and you will return to the previous menu.