chiliGREEN M400A - Manual (Page 153)

C
Intel Video Driver Controls
Display Modes C - 9
To Enable Intel(R) Dual Display Clone Mode
1. Attach your external monitor to the external monitor port (or TV to the S-
Video-Out Port), and turn it on.
2. Go to the Graphics Properties control panel (see “Intel Graphics
Properties” on page C - 3 ) and click Devices (tab).
3. Click Intel(R) Dual Display Clone (icon).
4. Choose which attached device will be Primary or Secondary.
5. Adjust the settings by clicking the Display Settings (tab) if necessary.
6. Click Apply (and OK to confirm the settings change) and OK (button).
Figure C - 5
Display Settings
(Clone)