chiliGREEN GA-7VT600-p-l - Manual (Page 23)

- 19 - Hardware Installation Process
English
If you want the detail information for 2-/4-/6-channel audio setup
installation, please refer to page 74.
Z USB/LAN* Connector LAN is fast Ethernet with 10/100Mbps speed.
Before you connect your device(s) into USB
connector(s), please make sure your device(s)
such as USB keyboard, mouse, scanner, zip,
speaker...etc. have a standard USB interface.
Also make sure your OS supports USB controller.
If your OS does not support USB controller, please
contact OS vendor for possible patch or driver
upgrade. For more information please contact your
OS or device(s) vendors.
[ Audio Connectors After install onboard audio driver, you may con-
nect speaker to Line Out jack, microphone to MIC
In jack. Device like CD-ROM,walkman etc. can
be connected to Line-In jack.
Please note:
You are able to use 2-/4-/6-channel audio feature
by S/W selection.
If you want to enable 6-channel function, you
have 2 choices for hardware connection.
Method1:
Connect "Front Speaker" to "Line Out"
Connect "Rear Speaker" to "Line In"
Connect "Center and Subwoofer" to "MIC Out ".
Method2:
You can refer to page 26, and contact your
nearest dealer for optional SUR_CEN cable.
Line In (Rear Speaker)
MIC In (Center and Subwoofer)
Line Out (Front Speaker)
" * " For GA-7VT600-P-L only.
USB 0
USB 1 USB 2
USB 3
LAN*