chiliGREEN HMC-3903 - Manual (Page 61)

61 / 62
(4) C lick the “OK” icon.
Question 7. During power on, why the TV will have a short flash, blue screen or
screensaver?
Answer:
This is normal, when the system initialize, it will setup the corresponding parameters so it can
output the correct video signal to the TV, during the initializing time, the TV will receive
incorrect signals or the signals will not be stable and will cause the TV screen to flash, some
TV will treat it as no signal, and will display a blue screen or screensaver.
Question 8. Why when switch to Y/Pb/Pr 480P, 576P, 720P, 1080I, the TV screen will be a
mess?
Answer:
Please check if your TV supports Y/Pb/Pr 480P, 576P, 720P, 1080I output, if your TV does not
support, please use the A/V signal display instead, press the TV SYSYEM button on the
remote control, then switch the TV‟s video input to NTSC or PAL.
Question 9. Why there is no sound in movie, music playback when using Y/Pb/Pr
output?
Answer:
Y/Pb/Pr output is a video output only, and does not include sound signals, when using Y/Pb/Pr
output, please plug the A/V OUT or the S/PDIF jack to output sounds.
Question10. Why couldn ‟t the player find the hard disc?
Answer:
Make sure the firmware is installed correctly, and no system partitions on the HDD were
deleted. If hard disc failure occurs, please backup your data and reinstall the firmware using
the PC Installer software which is provided along with the player.
Question11. Some functions like recording, time shift etc. do not work. What should I
do?